Breakdown handles motor of ROBODRILL main shaft

Motor of main shaft of overview of breakdown of main shaft motor rotates because of be in high speed for long condition, it is the component of opposite more incidental breakdown on the machine tool, and the breakdown of main shaft motor, bearing breakdown causes great majority. When malfunction, be like: Load increases, noise slants to wait greatly, the proposal quits equipment movement instantly, connection sends that division after service personnel undertakes handling, or tear open next evacuation Shanghai to send that family company to undertake maintaining. 2.

Main shaft motor maintains flow 2.

1 tear open solution, clean tear open main shaft motor solution, clean crust and rotor burnish clean, if have,wear away to need to change to be tasted newly. 2.

2 change breakdown spare parts changes the malfunctioning spare parts, one-time spare parts such as bearing and relevant accessory. 2.

3 precision detect detect etc of core axis precision all sorts of precision, affirm be in leave factory inside limit. 2.

4 sensor position adjusts sensor to be used at detecting motor rotate speed, if sensor too stand by gear to cause sensor damage possibly, if too be far from can cause rotate speed to detect not accurate, and generation calls the police, must use special device to undertake the adjustment of sensor position so. 2.

5 dynamic balancing are adjusted like after resembling car filling embryo, wanting to do dynamic balancing to adjust, main shaft motor needs to do dynamic balancing to adjust likewise, and many more accurate, the motor meeting that had not done dynamic balancing to adjust appears noise is big, shake the circumstance such as Dao Wen of big, treatment. 2.

6 bale deliver goods maintenance the motor after undertakes packing, give back client. 3.

Use blame installs the hidden trouble of spare parts to maintain quality to ensure formerly, arrive greatly rotor, stator, small to a screw, what Shanghai sends maintenance of that division spare parts to use is spare parts of former outfit entrance entirely, this is can buy on the market " substitute " place cannot compare. Use blame installs spare parts to may cause following hidden trouble formerly: Life is brief: Malfunction again inside short time, cause equipment for many times to stop machine, influence production. Precision is poor: Short of of the precision after maintenance leaves factory precision requirement, create all sorts of treatment problems. Cause other part damage: May cause other part damage, cause bigger loss, discard as useless even. It is the case that breakdown of a few bearing causes trouble of motor rotor, stator as follows. Case 1: Bearing attaint, bring about rotor to wear away, dynamic balancing cannot adjust case 2: The stator coil damaged, case that break a string 3: Bearing disintegrate, bring about rotor stator to wear away serious CNC Milling